No sign, except for signs listed in Section 7-103, shall be constructed, erected, enlarged, relocated or structurally altered until a zoning permit for such sign has been obtained in accordance with the procedure set out in Article 9 of these regulations. No zoning permit for any sign shall be issued unless the sign complies with the regulations of this Article 7. All signs lawfully existing at the time of passage of these regulations may remain in use, including those in the status of legal nonconformance. The purpose of this article is to safeguard the public use of the streets and the sidewalk area and to equitably enhance the visual environment, (See Section 2-102 for definition of SIGN.) (See K.S.A. 68-2231 for state sign regulations.)
A. Functional Types.
1. Advertising Sign: A sign which directs attention to a business, commodity, service or entertainment conducted, sold or offered at a location other than the premises on which the sign is located or to which it is affixed including political or public service announcements.
2. Bulletin Board Sign: A sign that indicates the name of an institution or organization on whose premises it is located and which contains the name or names of persons connected with it, and announcements of persons, events or activities occurring at the institution. Such sign may also present a greeting or similar message.
3. Business Sign: A sign which directs attention to a business or profession conducted; or to a commodity or service sold, offered or manufactured; or an entertainment offered on the premises where the sign is located or to which it is affixed.
4. Construction Sign: A temporary sign indicating the names of designers and contractors involved in the construction of a project during the construction period and only on the premises on which the construction is taking place.
5. Identification Sign: A sign giving the name and address of a building, business, development or establishment. Such signs may be wholly or partly devoted to a readily recognized symbol.
6. Nameplate Sign: A sign giving the name and/or address of the owner or occupant of a building or premises on which it is located, and where applicable, their professional status.
7. Real Estate Sign: A sign pertaining to the sale or lease of the lot or tract of land on which the sign is located, or to the sale or lease of one or more structures, or a portion thereof located thereon, including auction signs.
B. Structural Types.
1. Awning, Canopy or Marquee Sign: A sign that is mounted or painted on, or attached to, an awning, canopy or marquee that is otherwise permitted by these regulations. No such sign shall project further below than seven feet from the ground level or beyond the physical dimensions of the awning, canopy or marquee.
2. Ground Sign: Any sign placed upon, or supported by, the ground independent of the principal or accessory buildings or structures on the property. Portable signs do not numerically count as ground signs for the district regulations.
3. Pole Sign: A sign that is mounted on a free-standing pole, the bottom edge of which sign is seven feet or more above ground level.
4. Projecting Sign: A sign that is wholly or partly dependent upon a building for support and which projects more than 12 inches from such building.
5. Roof Sign: A sign totally supported on the roof of a building which does not project more than 12 inches beyond the face of the structure.
6. Temporary Sign: A sign in the form of a banner, pennant, valance or advertising display constructed of fabric, cardboard, wall board or other lightweight materials, with or without a frame, intended for temporary display of not more than 15 days at a time.
7. Wall Sign: A sign fastened to or painted on a wall of a building or structure in such a manner that the wall becomes merely the supporting structure or forms the background surface, and which does not project more than twelve inches from such building.
A. Gross Surface Area of Sign. The entire area within a single continuous perimeter enclosing the extreme limits of such sign, and in no case passing through or between any adjacent elements of same. Such perimeter shall not include any structural elements lying outside the limits of such sign and which do not form an integral part of the display. When two or more signs are located on a zoning lot, the gross surface area of all signs on the lot shall not exceed the maximum gross surface per street frontage set by the applicable district regulations, except as is provided by Section 7-102B. Signs on interior lots which may be viewed from both directions of the adjacent street are considered to have a single gross surface area.
B. Corner and Through Lots. On corner and through lots, each lot line that abuts a street or highway shall be considered a separate street frontage. On corner and through lots, restrictions that are phased in terms of the number of signs per zoning lot shall be deemed to permit the allowable number of signs to face each street or highway that abuts the lot.
C. Height of Sign. The maximum height of signs shall be measured from ground level at the base of or below the sign to the highest element of the sign and shall be determined for purposes of Article 7 as independent from the maximum structure height for zoning districts.
D. Building and Electrical Codes Applicable. All signs must conform to the structural design standards of any applicable building code. Wiring of all electrical signs must conform to any applicable electrical code.
E. Illuminated Signs. Signs shall be shaded wherever necessary to avoid casting bright light upon property located in any residential district or upon any public street or park. Any brightly illuminated sign, located on a lot adjacent to or across the street from any residential district, which is not otherwise shaded and visible from such residential district, shall not be illuminated between the hours of 11 P.M. and 7 A.M.
F. Flashing or Moving Signs. No flashing signs, rotating or moving signs, animated signs, signs with moving lights or signs which create the illusion of movement shall be permitted in any residential district.
G. Metal and Nonmetal Signs. Signs constructed of metal and illuminated by any means requiring internal wiring or electrically wired accessory fixtures attached to a metal sign shall maintain a free clearance to grade of eight feet. Accessory lighting fixtures attached to a nonmetal frame sign shall also maintain a clearance of eight feet to grade. Metal or nonmetal signs, whether illuminated or not, shall maintain a clearance of at least seven feet underneath awnings, canopies or marquees.
H. Access Way or Window. No sign shall block any access way or window required by any applicable building, housing, fire or other codes or regulations.
I. Signs on Trees or Utility Poles. No private sign shall be attached to a tree or utility pole whether on public or private property.
J. Traffic Safety.
1. No sign shall be maintained at any location where by reason of its position, size, shape or color; it may obstruct, impair, obscure, interfere with the view of, or be confused with; any traffic control sign, signal or device; or where it may interfere with, mislead or confuse traffic.
2. No sign shall be located in any vision triangle as defined in Section 2-102, except official traffic signs and signs mounted eight feet or more above the ground whose supports, not exceeding two, do not exceed 12 inches at the widest dimension and, thus, do not constitute an obstruction.
K. Location. No sign or structure thereof shall be permitted on a public right-of-way or public easement, except temporary real estate and garage sale signs may be placed on the public right-of-way with the approval of the adjacent landowner to provide direction to the property; provided, that such signs do not obstruct traffic visibility. No sign shall be permitted to project over a public right-of-way or public easement, except with the approval of the Board of Zani ng Appeals as a conditional use, or as a permitted use in the B-1 Central Business District when the lowest part of such sign is at least eight feet above the sidewalk area. (See Section 7-102G for clearance of Metal and Nonmetal Signs. Section 7-102L2 for portable signs. Section 7-103A5 for garage sale signs and Section 7-103B5 for real estate signs.)
L. Portable Signs. Notwithstanding any other provisions of these regulations and, in particular, Article 7, the following provisions apply to the use of portable signs:
1. A portable sign is defined as a temporary on-site sign designed in such a manner as to be readily movable and not permanently attached to the premises, such as A-frames, trailer signs, signs placed on vehicles, beacon lights and other similar signs. Removal of any wheels shall not change the definition of being readily moveable. Any such sign shall not exceed a height of 10 feet above grade level nor 60 square feet in gross surface area.
2. All the general standards of Sections 7-102 A through Kare applicable to portable signs, except that in Section 7-102K such signs may project over or be located on public easements, but not the road right-of-way. No such signs shall be placed on the roof of structures. Temporary uses of portable signs may be placed on public road right-of-way only when the location has been approved by the Zoning Administrator, in accordance with Section 7-102J 1 and 2. Portable signs shall not be placed on the road right-of way, for more than 15 days at a time, and six times per calendar year.
3. Whereas portable signs are not required to set back any minimum distance from lot lines in any zoning district, the Zoning Administrator shall, in his discretion, strictly enforce the traffic safety provisions of Section 7-102J1, especially at corner inter sections and driveway entrances and exits.
4. In all zoning districts, except residential districts, portable signs are permitted; however, any such sign shall not be located closer than 50 feet to another such sign when measured along the frontage whether the latter is located on the same or another zoning lot, except that each business firm shall be permitted at least one such sign notwithstanding the 50 foot minimum spacing standard.
5. In all residential districts only portable signs are permitted which limit their messages to the following subjects:
a. Announcements of special occasions or activities of nonprofit organizations such as churches and fraternal and service clubs.
b. Announcements related to personal or family events such as “Happy Birthday” and the like.
The above signs are limited to a display period of not more than three days for any one announcement with the gross surface area not to exceed 32 square feet and only one sign at a time permitted on the premises of the party making the announcement.
6. In addition to the provisions of Sections 7-102D and E, strobe light sources or flashing bulbs or signs which create the illusion of movement shall not be permitted on portable signs in any district. Electrified portable signs shall not be connected to any electrical power source except during the hours when the business, office or institution is open. Electrical lines shall not be permitted to lay on the ground where vehicular traffic or pedestrian passage is allowed and the use of extension cords for portable signs is prohibited. Ground Fault Circuit Interrupters (G.F.C.I.) are required on all electrified signs.
7. A zoning permit for each portable sign shall be obtained for all or a portion of each calendar year when the sign remains on the zoning lot. Permits in residential districts are not required which meet the criteria of Section 7-102L5 above. All portable signs shall bear an identification marker to indicate the owner’s name and some system of identifying the individual sign, e.g., by number.
8. Any unauthorized portable sign placed on public property, including the public street right-of-way, is declared to be a public nuisance and be the cause of its removal and impoundment without notice. If not redeemed within 30 days by the owner paying a service charge, the City may dispose of the sign in any manner deemed appropriate. The Zoning Administrator may revoke the permit for any sign deemed to be in violation of this Section, i.e., 7-102L, or of any condition on which the permit was based and order its removal within a reasonable period consistent with public safety.
M. Damaged or Unsafe Signs. The Zoning Administrator shall require the immediate repair or removal of any conforming or nonconforming sign or sign structure which has been damaged or deteriorated so as to become a public hazard. Such a sign or sign structure may be restored to its original condition without obtaining a zoning permit, unless the sign is replaced and, thus, must conform to the current regulations.
A. The following signs shall be exempt from the requirements of this Article:
1. Signs of a duly constituted governmental body including school districts such as traffic or similar regulatory devices, legal notices, warnings at railroad crossings, identification purposes and other instructional or regulatory signs having to do with health, safety, parking, swimming, dumping, etc.
2. Flags or emblems of a government or of a political, civic, philanthropic, educational or religious organization, when displayed on private property.
3. Small signs, not exceeding five square feet in gross surface area, displayed on private property for the convenience of the public, including signs to identify entrance and exit drives, parking areas, one-way drives, rest rooms, freight entrances and the like.
4. Address numerals and other signs required to be maintained by law, rule or regulation; provided, that the content and size of a sign does not exceed such requirements.
5. Garage sale signs not exceeding four square feet in gross surface area. (See Section 7-102K for location on right-of-way.)
6. Memorial signs which are displayed on private property.
7. Scoreboards in athletic fields or stadiums.
8. Political campaign signs, not exceeding 32 square feet in gross surface area, which are displayed on private property and not otherwise in the public right-of-way. Such signs must be removed 48 hours after a candidate is elected to office or is eliminated from further participation in the election as a candidate with similar provisions for bond issues and other ballot issues. Such signs may also be displayed as, advertising signs where permitted by Section 7-104.
9. Ideological signs such as may pertain to religious or political expressions or personal beliefs when located on private property of the proponent and not otherwise in a public right-of-way, a sight obstruction in a vision triangle or on public property or structures such as utility poles.
B. The following signs are exempt from the zoning permit requirements of Section 7-100, but shall comply with all of the other regulations imposed by this Article:
1. Nameplate signs not exceeding two square feet in gross surface area accessory to a residential building, including all types of manufactured and mobile homes.
2. Identification signs not exceeding 40 square feet in gross surface area accessory to a multiple-family dwelling or manufactured/mobile home park.
3. Bulletin board signs not exceeding 40 square feet in gross surface area accessory to a church, private school, or public or nonprofit institution.
4. Business signs when located on property used for agricultural purposes and pertaining to the sale of agricultural products produced on the premises.
5. Real estate signs not exceeding six square feet in gross surface area and which pertain to the sale or lease of the lot or tract or structure on which the sign is located, except for the provision of Section 7-102K. (See Section 7-101A7 for auction signs.)
6. Temporary signs which do not exceed 20 square feet in gross surface area and are displayed not more than four times per calendar year.
A. R-1 and R-2 Residential Districts and MH-1 and MH-2 Manufactured/Mobile Home Districts.
1. Functional Types Permitted:
a. Bulletin board signs.
b. Business signs pertaining to home occupations.
c. Construction signs.
d. Identification signs.
e. Nameplate signs.
f. Real estate signs.
2. Structural Types Permitted:
a. Ground signs.
b. Pole signs.
c. Wall signs.
d. Business signs pertaining to home occupations shall be affixed flush to the wall of a building.
3. Number of Signs Permitted: One of each functional type per zoning lot.
4. Maximum Gross Surface Area.
a. Bulletin board and identification signs: 16 square feet in R-1, MH-1 and MH-2 districts and 24 square feet permitted in the R-2 district.
b. Business signs pertaining to a home occupation only: Two square feet or the minimum required by state statutes.
c. Construction signs: 40 square feet.
d. Nameplate signs: Two square feet.
e. Real estate signs: Six square feet per lot; provided, that one sign not more than 100 square feet in area announcing the sale of lots and/or houses in a subdivision may be located on such development. Such sign shall be removed when 75% of the lots in the subdivision have been sold.
5. Maximum Height: 15 feet; provided, that signs associated with one and two-family dwellings and all types of manufactured and mobile homes shall not be located at a height greater than eight feet above ground floor elevation.
6. Required Setback: 10 feet from the front lot line, except temporary real estate and garage sale signs, and none from the side yard setbacks.
7. Illumination: No sign shall be illuminated, except that bulletin board and identification signs may be indirectly illuminated with incandescent or fluorescent light.
B. B-1 Service Business District.
1. Functional Types Permitted: Any type listed in Section 7-101A, including advertising signs not exceeding 32 square feet in maximum gross surface area when approved as a conditional use by the Board of Zoning Appeals.
2. Structural Types Permitted: Any type listed in Section 7-101B, except projecting and roof signs.
3. Number of Signs Permitted:
a. Ground and pole signs: One of each functional sign per zoning lot.
b. Other structural types permitted: No limitation.
4. Maximum Gross Surface Area: One square foot of sign area for each one foot lineal street frontage.
5. Maximum Height: 30 feet, provided no sign shall extend higher than the roof line of the principal structure, except for gasoline service stations.
6. Required Setback: No minimum required.
7. Illumination: Illuminated signs shall be permitted.
C. B-2 Central Business District.
1. Functional Types Permitted: Any type listed in Section 7-101A, except advertising signs.
2. Structural Types Permitted: Any type listed in Section 7-101B.
3. Number of Signs Permitted:
a. Ground and pole signs: One of each functional sign per zoning lot.
b. Other structural types permitted: No limitation.
4. Maximum Gross Surface Area: Two square-foot of sign area for each one foot lineal street frontage; provided, no single sign shall exceed a gross surface area of 100 square feet.
5. Maximum Height: 30 feet, except that roof signs may not exceed a height of five feet above the highest point of the roof.
6. Required Setback: No minimum required.
7. Illumination: Illuminated signs shall be permitted.
D. I-1 Industrial Districts.
1. Functional Types Permitted: Any types listed in Section 7-101A.
2. Structural Types Permitted: Any types listed in Section 7-101B.
3. Number of Signs Permitted:
a. Ground and pole signs: One of each functional sign per zoning lot.
b. Other structural types permitted: No limitation.
4. Maximum Gross Surface Area: Three square feet of sign area for each one foot lineal street frontage; provided, no single sign shall exceed a gross surface area of 300 square feet.
5. Maximum Height:
a. Wall and roof signs: 10 feet above the highest point of the roof line on which such sign is located.
b. All other signs: 30 feet.
6. Required Setback: No minimum required.
7. Illumination: Illuminated signs shall be permitted.